HT45F4N/HT45FH4N

Power Bank Flash MCU

General Information

The device is a Flash Memory type 8-bit high performance RISC architecture microcontroller. Offering users the convenience of Flash Memory multi-programming features, this device also includes a wide range of functions and features. Other memory includes an area of RAM Data Memory as well as an area of True EEPROM memory for storage of non-volatile data such as serial numbers, calibration data etc.

Analog features include a multi-channel 12-bit A/D converter, two over current protection functions, an over/under voltage protection function, an USB charge/discharge auto detection function and a LDO regulator. Multiple and extremely flexible Timer Modules provide timing, pulse generation and PWM generation functions. Protective features such as an internal Watchdog Timer, Low Voltage Reset and Low Voltage Detector coupled with excellent noise immunity and ESD protection ensure that reliable operation is maintained in hostile electrical environments.

A full choice of HIRC and LIRC oscillator functions are provided including a fully integrated system oscillator which requires no external components for its implementation. The ability to operate and switch dynamically between a range of operating modes using different clock sources gives users the ability to optimise microcontroller operation and minimize power consumption.

This device contains USB ports which are used to implement the Charge/Discharge Detection function. Also the inclusion of flexible I/O programming features, Time-Base functions along with many other features ensure that the device will find excellent use in USB charge/discharge applications. 

 

CPU Features

Operating Voltage
  • fSYS = 7.5MHz: 2.55V~5.50V
  • fSYS = 15MHz: 4.50V~5.50V
Up to 0.27us instruction cycle with 15MHz system clock at VDD =5VAvailable
Power down and wake-up functions to reduce power consumptionAvailable
Oscillators
  • - Internal RC -- HIRC
  • - Internal 32kHz -- LIRC
Multi-mode operation

NORMAL, SLOW, IDLE and SLEEP

All instructions executed in one or two instruction cyclesAvailable
Table read instructionsAvailable
63 powerful instructionsAvailable
8-level subroutine nestingAvailable
Bit manipulation instructionAvailable

Peripheral Features

Flash Program Memory

4Kx16

RAM Data Memory

192x8

True EEPROM Memory

64x8

Watchdog Timer functionAvailable
Up to 26 bidirectional I/O linesAvailable
Software controlled 4-SCOM lines LCD driver with 1/2 biasAvailable
Three pin-shared external interruptsAvailable
One 16-bit STMAvailable
Three 10-bit PTMsAvailable
Two complementary PWM output with dead time controlAvailable
Two over current protection (OCP) with interruptAvailable
One Over/Under voltage protection (OUVP) with interruptAvailable
USB charge/discharge auto detection functionAvailable
Dual Time-Base functions for generation of fixed time interrupt signalsAvailable
14-channel 12-bit resolution A/D converter (external input)Available
Low voltage reset functionAvailable
Low voltage detect functionAvailable
One integrated LDO

5V output − HT45FH4N only

2 level shift output pins − HT45FH4N onlyAvailable
Package

28-pin SSOP

Resources

TitleDateFile SizeLanguageDownload