HT45F5N/HT45FH5N

Power Bank Flash MCU

General Information

The devices are a Flash Memory type 8-bit high performance RISC architecture microcontroller. Offering users the convenience of Flash Memory multi-programming features, these devices also include a wide range of functions and features. Other memory includes an area of RAM Data Memory as well as an area of true EEPROM memory for storage of non-volatile data such as serial numbers, calibration data etc.

Analog features include a multi-channel 12-bit A/D converter, two over current protection functions, two sets of over/under voltage protection functions, high resolution PWM output with auto-adjust PWM duty function and an USB devices auto detection function. Multiple and extremely flexible Timer Modules provide timing, pulse generation and PWM generation functions. Protective features such as an internal Watchdog Timer, Low Voltage Reset and Low Voltage Detector coupled with excellent noise immunity and ESD protection ensure that reliable operation is maintained in hostile electrical environments.

These devices also include fully integrated low and high speed oscillators which are flexibly used for different applications. The ability to operate and switch dynamically between a range of operating modes using different clock sources gives users the ability to optimise microcontroller operation and minimise power consumption. Easy communication with the outside world is provided using the internal I2C and SPI interface. While the inclusion of flexible I/O programming features, Time-Base functions along with many other features ensure that the devices will find excellent use in different power bank applications.

Circuitry specific to Power Bank applications is also fully integrated within the devices. These include functions such as over and under voltage protection, over current protection and auto detect. These features combine to ensure that a minimum of external components is required to implement Power Bank applications, providing the benefits of reduced component count and reduced circuit board areas.

 

CPU Features

Operating Voltage

fSYS = 8MHz: 2.55V~5.5V

Up to 0.5us instruction cycle with 8MHz system clock at VDD =5VAvailable
Power down and wake-up functions to reduce power consumptionAvailable
Oscillators
  • - Internal RC -- HIRC
  • - Internal 32kHz -- LIRC
Multi-mode operation

NORMAL, SLOW, IDLE and SLEEP

All instructions executed in one to three instruction cyclesAvailable
Table read instructionsAvailable
115 powerful instructionsAvailable
8-level subroutine nestingAvailable
Bit manipulation instructionAvailable

Peripheral Features

Flash Program Memory

4Kx16

RAM Data Memory

256x8

True EEPROM Memory

64x8

Watchdog Timer functionAvailable
Up to 28 bidirectional I/O linesAvailable
Slew Rate Control for PB0~PB3 Ports outputAvailable
Serial Interface Module – SPI or I2CAvailable
Software controlled 4-SCOM lines LCD driver with 1/2 biasAvailable
Three pin-shared external interruptsAvailable
Multiple Timer Modules for time measure, input capture, compare match output, PWM output or single pulse output functionAvailable
High Resolution PWM complementary output with dead time controlAvailable
Auto-adjust PWM Duty functionAvailable
Two over current protection (OCP) with interruptsAvailable
Two sets of Over/Under voltage protection (OUVP) with interruptsAvailable
USB auto detection functionAvailable
Dual Time-Base functions for generation of fixed time interrupt signalsAvailable
Multi-channel 12-bit resolution A/D converterAvailable
Low voltage reset functionAvailable
Low voltage detect functionAvailable
Flash program memory can be re-programmed up to 10,000 timesAvailable
Flash program memory data retention > 10 yearsAvailable
True EEPROM data memory can be re-programmed up to 100,000 timesAvailable
True EEPROM data memory data retention > 10 yearsAvailable
Package Types
  • HT45F5N:28-pin SSOP
  • HT45FH5N:46-pin QFN

Resources

TitleDateFile SizeLanguageDownload